Zak Hardener (Part B) is the mixing/pairing agent to use with our Zak Enamels range.
Steps For Use:
- Measure equal volume (1:1) of your Zak Enamel (Part A) color of choice with the Zak Hardener (Part B, sold separately) into two measuring cups.
- Once measured correctly, combine in a separate container.
- Slowly mix in one direction until completely combined without excess not stirred in for 3-5 minutes.
- After this is completed, let the mixture sit for another 5 minutes until all bubbles disappear.
- Slowly pour mixture into the mold of choice – IF – bubbles appear after 5-10 minutes after pouring, remove them with a heat gun. Curing temperature should be room temperature (ideally the best temperature is 77 degrees).
- Wait 24 hours to fully cure before removing from mold.
Ingredients of B Hardener:
|
Substance Name |
Conc. (%) |
CAS.No |
|
Propyidynetrimethanol, propoxylated, reaction, products with ammonia |
50%-7 |
39423-51-3 |
|
Benzyl alcohol |
29%-49% |
100-51-6 |
|
Ethyl 4 – [[(methylphenylamino) methylene] amino] benzo- |
1% |
57834-33-0 |
STORAGE & DISPOSAL:
Keep the bottles sealed after use. Dispose of contents in accordance with local, regional, national, and international regulations. Keep away from children. Keep out of reach of children.
WARNING:
Harmful if swallowed
May cause skin corrision and eye damage.
Toxic to aquatic life with long lasting effects.
FIRST AID:
If in contact with the skin, wash immediately with soap and rinse for several minutes
If in contact with the eyes, rinse with water for several minutes.
If accidentally swallowed rinse immediately and spit it out and call a doctor.
If you feel any discomfort please seek medical advice in time.
For more health information you can contact poison control center for free
