Sturdy framed panels provide hassle-free installation by bolting directly to rack uprights with right angle mounting brackets.
Panels may be easily extended above the rack with “above-the-top” extension supports (contact us for assistance).
Finish: Gray powder coat. Other colors are available for an additional fee but may extend lead time; contact us for more information.
Four brackets per panel are required for installation.
Doors attach to teardrop holes. Two clips per door mount to upright face teardrops. Doors then connect to these clips. Both doors will swing open.
Back panels attach with clips to teardrop holes on the rear side of the rack with carriage bolts.
Side panels: End of row side – angle frame panels clips to the side of the upright using carriage bolts. Can Tek screw on if there are no holes. Center of row panel (inside the rack bay): Flat frame with holes in the frame. This panel must tek screw to the interior rack upright.
Some rack brands (particularly Ridg-U-Rack) may require Tek Screws for installation due to long slots rather than teardrop connections.
Mounting options (select when you order)
Flush mounted
The rack backing is flush mounted directly to the pallet rack uprights. There is no space between the rack and the cage that would allow access to stored items.
Offset mounted
Panels mount to the pallet rack upright with an off-set bracket. Off-set brackets up to 6″ available. With offset mounting, you can overhang pallets from your rack
California Proposition 65
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
